Wednesday, February 17, 2010

Got a proxon mini router.

NEC_0124.JPGGot a proxon mini router to cut shafts of canned motor. It's a bit tough job for a pair of far sighted eyes because it's really a tiny thing. I would do the work when my eyes work better than usual.

Hayaokidori website

Wednesday, February 10, 2010

Battle with snow

We have tons of snow this season.
NEC_0121.JPG As you see, snow is a lot taller than my pajero even though I threw some there.
(^^;;; Of course, I am not visible from the opposite side.

This is not the only story!
Most snow drops off the roof but we have a roof which is not steep enough, so I have to climb there to shovel snow. Have to put a tall ladder to reach there.MoCIMG3708.JPG View from the top. The ladder is approxiately 3 meters tall but expandable. I expand it a bit to reach the roof. Have to climb slowly and carefully as it's sometimes windy all of sudden. The flat roof is roughly 6 tatami mats big ( 10 square meters ), so if I shovel the snow there often, it's not a hard work. 





CIMG3709.JPGBut this time we got a lot more snow than expected, totally more than 1 meter tall on the roof. This made it harder to shovel even if it was just a 6 tatami mats big :o
The shovel in the picture is roughly 150cms tall, so you can guess how much snow was on the roof. I devide the snow into smaller pieces by the shovel to throw down.






CIMG3706.JPGAs I throw snow on the ground, the warehouse entrance looks like this! Have to shovel there, too to get in and out.(^^;;;






Time for our snowblower to show up when I complete to drop all the snow off.CIMG3712.JPG Our snowblower since autumn 2002. 4 sylinder engine of 18 horse power. Our previous antique snowblowerhad a 2 sylinder engine of 16 horse power, it consumed much less gasoline. Our present snowblower exactly consumes much more gasoline but it can throw snow a lot farther, which makes it easier to remove snow. All the operation for example having the auger up and down, shooter left to right etc are controlled by oil pressure, so if anything goes wrong with it, the present snowblower never works :( The antique snowblower needed me to operate everything by hand, so it was exactly tough but less trouble.

Snow removing job is not easy, it's a danger work. Always have to be careful and need to stay safe. When we have tons of snow, we need to do this kind of job often to survive.

Hayaokidori website

Monday, February 8, 2010

Replacing motors of model train.

Lately I feel I have to do something for my model train after a long interval. Anyway I have a layout, so what about replacing motors if some locomotives or motorcars don't run good?
This below is what we call "can motor".
CIMG3715.JPG They say if you replace an old vertical motor into this one, your locomotives/motorcars can go very slowly as well as fast running. Also, it consumes less electricity which works better when your layout is a DCC one.
But the problem is the long shaft - the right side thin pole. It's a bit to get in a worm gear, so I have to cut it a bit. I don't have a special stuff for it, seems I have to find a good rooter ( spelling?? ) for it.
Some bloggers of same hobbies adviced me to find a proxon one, so I have been browsing web sites to learn how it works.

Hayaokidori web site

Wednesday, July 22, 2009

How hanged flower pots are destroyed!

Now everything was clear why our hanged flower pots are broken so easily.
The sand in the pots were covered by some hemp palm fibers which go bad easily.

I never imagined this, but...

White eyes pick the hemp palm fibers one after another!!!

I guess probably now it's time for them to breed, so they need some materials to make nests for it. Hemp palm finbers are probably good for them though, I almost laughed out loud. Never, never imagined they were the criminals :)

Even small living things work that hard to live on, why don't we?

Hayaokidori website

Wednesday, July 8, 2009

Puddings

puddings01.jpgI made these puddings in some small souffles. I do cook, it changes that the way how to cook something depends on the time. For example something must be sweeter before than now but nowadays less sweet things might be preferred because of the diet boom. It seems that there are many ways to cook puddings, I have my way to do as well as others. So i always try to find the best way for it by repeating some failures and success.



puddings02.jpgThis one is in a bigger vessel originally for baking some cakes. 30 minutes needed in an oven. 20 minutes for souffles but this is bigger, so needed more time.




puddings03.jpgBiggest of the three!Very big but shorter then the previous vessel, so it just needed 40 minutes being in an oven.
I guess you know you can enjoy puddings soon after you take some from an oven if you have ever made any. Usually we enjoy puddings taking them out from refridgeators but hot ones are also great!. This is only those who make puddings by themselves can enjoy because puddings sold in shops are usually cold.



Hayaokidori website

Monday, July 6, 2009

A grove ground

09070202.jpgA grove nearby which looks a little bit dark even in midsummer. Seldom found in big cities. If there were some bamboo grasses at the ground, maybe nitingales come to nest?



Hayaokidori website

Saturday, July 4, 2009

A hornet?

delfinium21.jpgI think this is a hornet which often visits delfinium flowers that are in bloom now to get their nectar. Some people say it's not a hornet, so I am really not sure it is or not. They work very hard to get nectar. When I observe them hard, I find they prefer deep flowers which they need to get in to get the nectar. For example, delfiniums and Nasturtiums etc.
I guess those flowers hold very yummy nectar :)